Straightforward Guide to Installing a New Shower Unit

Straightforward Guide to Installing a New Shower Unit

Blog Article

Schedule Service

Everyone may have his or her own way of thinking when it comes to How to Install a Direct-to-Stud Shower Enclosure.

An effective shower setup requires careful planning as well as a lot of work. Most of the times, you will certainly need to do 3 kinds of tasks: framing wall surfaces, mounting the plumbing, and also finishing walls.

Prep work

To start with, you must choose the kind of shower that you wish to install. It is very important to ascertain whether the picked shower can dealing with specific systems and can control a risk-free level of water through the central heating boiler. Most shower systems nowadays are made to be flexible to various water pressures (such as saved warm water as well as cool mains).
It is also important to think about the water pressure and the preparation of the piping as well as water drainage for the shower

Various Types of Shower Units

Push-on Mixer: The pipe as well as spray parts of the push-on mixer shower system can be attached to the bathroom tap as per your requirement, and also the water temperature can be changed by means of the faucets. Push-on mixers are cheap and also extremely straightforward to set up. Nonetheless, although the tube connection is easy, it is easily displaced. Furthermore, it is inconvenient to change the temperature level.

Bath/Shower Mixer: The hose pipe as well as spray of this kind of shower are incorporated with a bathroom mixer tap, as well as the temperature can be readjusted through the bathroom taps. It is a really low-cost choice and no added plumbing is involved. Nonetheless, the bath/shower mixers additionally struggle with bothersome temperature control alternatives.

Handbook Mixer: The tube as well as spray of a hand-operated mixer shower device belong of the wall surface system as well as the hot and cold water products are attached to a single shutoff The temperature as well as stress of the water are controlled via either one or a variety of handles (in extra pricey showers). Although temperature control is a lot easier in hands-on mixer types, they are much more pricey than the formerly mentioned mixers. They also require additional plumbing of cold and hot water supply pipes.

Thermostatic Mixer: The hose and spray of this shower kind are a part of the wall surface system and also the hot and cold water supplies are connected to a single valve right here as well. It is total with an integrated stabiliser to self-adjust the water temperature level and also to prevent it from coming to be as well warm. One of the largest advantages of a thermostatic mixer shower type consists of hassle-free temperature level control. However, it is the most costly of the different mixer choices.

Power Shower: A power shower is a single device containing an effective electrical pump that is capable of changing both the water stress and temperature. This sort of shower can be fitted if there is water system from a cold water cistern and a hot water cyndrical tube. A power shower makes the modification of both pressure and also temperature easy. On the other hand, it disagrees for water heated straight by the shower or where the water is provided by a combination central heating boiler under mains pressure.

Electric Shower: An electric shower is plumbed right into a keys cold water supply and it heats the water electrically. It is important to keep in mind that for this shower kind to be set up, the mains stress requires to be at least 0.7 kg/sq cm (10lb/sq in). The unit enables the temperature level as well as pressure to be adjusted using a handle. Models with temperature level stabilisers are better as they remain untouched by various other taps somewhere else being used within the house. A major downside of electrical showers is that the control knob only allows for the alternative of heats at less pressure, or lower temperatures at a greater stress. This is bothersome in the winter season when the spray is typically weak and also the mains water is colder. However, this problem is tackled in some designs which are available with a winter/summer setting.

Method

Depending upon the type of shower you want to set up, the shower head have to either be fitted in order to avoid its contact with the water in the bath listed below or the base tray, or it should have a check valve.
Before starting, it is advisable to note the positions of the shower head as well as control, and also to intend the pipe-work included. Additionally, the water drainage system to get rid of the waste water will certainly require to be prepared. Both settings of the cord path and also the shower switch will likewise require to be considered if an instantaneous or electrical shower system is being set up.
Utilize the instruction overview offered with the shower system to fit the shower control.Before fitting the pipelines that will supply the water to the shower system, it is necessary to remove the supply of water. In order to safeguard the pipes, they should be offered a waterproof covering as well as also fitted with isolating shutoffs. The pipelines can then be buried right into the wall as well as plastered over to neaten the general look.
Fit the base tray, shower head, and also fittings.
Connect the major shower control to the pipelines that will be providing the water (This might call for a women screw thread adapter).
Reconnect the water as well as examination the pipes for any type of leakages, as some may need tightening.
If you are installing an electric shower, remember to turn off the power supply prior to making any kind of electrical links. Once these connections have actually been made (there must be assistance within the instruction manual), the power supply can be switched back on.

Changing Water Stress to Fit Your Shower

The cold water reservoir can be lifted to a better height (occasionally as low as 150mm (6inches)) by fitting a solid wooden assistance beneath it - perhaps composed of struts and also blockboards. If you choose this choice, the major and also circulation pipes will also need to be raised to meet the new elevation of the tank.
Alternatively, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever kind is picked, it must be connected right into the power supply in order to operate.

Piping and also Water drainage

It is best to use 15mm size supply pipes, and make the go to the shower as short and also straight as feasible so regarding maintain optimal stress and reduce warmth loss. Additionally, by minimising making use of joints for pipeline corners, you can lower the resistance in the flow of the water. You can achieve this by flexing the pipes rather.

Many Usual Errors

Going against or overlooking neighborhood code constraints.

Utilizing pipes that are also tiny.

Connecting copper to galvanized without making use of a brass or dielectric suitable between both.

Not using tape or pipe substance at threaded joints.

Not leveling your fixtures when mounting them.

Not mounting an air space loading for components.

Reducing supply stub outs too brief to mount the shutoff valves onto after the completed wall is in location.

Not properly straightening tubing right into fittings or quit shutoffs. (Compeling the nut onto the compression ring at an angle when the tubing goes to an angle will certainly trigger a leakage.).

When transforming the water back on in your home, always run the outdoors pipe valve or flush your bathrooms to hemorrhage dust and air from the lines. This particles can cause problems in your sink taps as well as various other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

I'm very serious about How to Install a Shower Enclosure and I'm hoping you appreciated the new blog post. Enjoyed reading our entry? Please share it. Let others discover it. I value reading our article about How to Install a Shower Enclosure .

Get A Free Estimate

Report this page